Question: 590
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage spaces:
� Data
� Users
� Backups
� Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Backups
D. Users
Answer: A
Explanation:
New Disks (Unallocated space) added to Primordial space Primordial Pool? All storage that meets acceptable criteria for Storage Spaces will be placed in
the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual
disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
References:
http://blogs.technet.com/b/canitpro/archive/2012/12/13/storage-pools-dive-right-in.aspx
http://blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storagespaces-is- it for-youcould-be.aspx
Question: 591
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From a command prompt, run sc.exe and specify the config parameter.
B. From a command prompt, run sc.exe and specify the sdset parameter.
C. From the Services console, configure the General settings.
D. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter.
Answer: A
Explanation:
Executing the sc.exe command with the config parameter will modify service configuration. To specify a binary path for the NEWSERVICE service, type: sc
config NewService binpath= "ntsd -d c:windowssystem32NewServ.exe"
References:
https://technet.microsoft.com/en-us/library/cc990290.aspx
http://technet.microsoft.com/en-us/library/cc738230(v=ws.10).aspx
Question: 592
You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum
amount of administrative effort.
What should you perform?
A. An online servicing by using Dism
B. An offline servicing by using Dism
C. An upgrade installation of Windows Server 2012 R2
D. A clean installation of Windows Server 2012 R2
Answer: A
Explanation:
A. Not least effort
B. Not least effort
C. dism /online /set-edition
D. offline would be less ideal and more work ex: DISM /online /Set-Edition:ServerEnterprise /ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows
Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing and Management tool). This tool has many features, but one
of those features is the ability to upgrade the edition of Windows in use. Note that this process is for upgrades only and is irreversible. You cannot set a
Windows image to a lower edition. The lowest edition will not appear when you run the /Get-Target Editions option. If the server is running an evaluation
version of Windows Server 2012 R2 Standard or Windows Server 2012 R2 Datacenter, you can convert it to a retail version as follows:
If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional domain controller on a server that runs a retail
version and remove AD DS from the domain controller that runs on the evaluation version. From an elevated command prompt, determine the current edition
name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online
/Set-Edition:<edition ID> /ProductKey:XXXXXXXXXX-XXXXX-XXXXXXXXXX
/AcceptEula, providing the edition ID and a retail product key.
The server will restart twice.
There are a couple of ways to install the GUI from the command prompt, although both use the same tool -DISM (Deployment Image Service Manager).
When you are doing it for a single (local) server, the command is:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:�
References:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/jj574204(v=ws.11)
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-7/dd744380(v=ws.10)
http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading-windows-server2008-r2-without-media.aspx
Question: 593
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as
shown in following table.
When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
A. The placement of the infrastructure master
B. The placement of the global catalog server
C. The placement of the domain naming master
D. The placement of the PDC emulator
Answer: B
Explanation:
User logon. In a forest that has more than one domain, two conditions require the global catalog during user authentication:
In a domain that operates at the Windows 2000 native domain functional level or higher, domain controllers must request universal group membership
enumeration from a global catalog server. When a user principal name (UPN) is used at logon and the forest has more than one domain, a global catalog
server is required to resolve the name.
References:
http://technet.microsoft.com/en-us/library/cc728188(v=ws.10).aspx
Question: 594
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create an image of Server1.
You need to remove the source files for all server roles that are not installed on Server1.
Which tool should you use?
A. dism.exe
B. servermanagercmd.exe
C. ocsetup.exe
D. imagex.exe
Answer: A
Explanation:
The Dism utility can be used to create and mount an image of Server1.
Incorrect Answers:
B: The ServerManagerCmd.exe command-line tool has been deprecated in Windows Server 2008 R2.
C: The Ocsetup.exe tool isused as a wrapper for Package Manager (Pkgmgr.exe) and for Windows Installer (Msiexec.exe). Ocsetup.exe is a command-line
utility that can be used to perform scripted installs and scripted uninstalls of Windows optional components. The Ocsetup.exe tool replaces the Sysocmgr.exe
tool that Windows XP and Windows Server 2003 use.
D: ImageX is a command-line tool in Windows Vista that you can use to create and manage Windows image (.wim) files. A .wim file contains one or more
volume images, disk volumes that contain images of an installed Windows operating system.
References:
http://technet.microsoft.com/en-us/library/hh824822.aspx
http://blogs.technet.com/b/joscon/archive/2010/08/26/adding-features-with- dism.aspx
http://technet.microsoft.com/en-us/library/hh831809.aspx
http://technet.microsoft.com/en-us/library/hh825265.aspx
http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).asp
Question: 595
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: I
Explanation:
Backup Operations in Hyper-V
No VSS Writer Available?
In some cases, you need an Application-consistent backup but there is no VSS writer available. One example of this is MySQL. Hyper-V backups of virtual
machines containing MySQL will always result in either a crash consistent or an image-level backup. For MySQL, the latter is probably acceptable as MySQL
doesn�t perpetually expand the log file. However, if you�re using MySQL within a VSS-aware VM, then a Hyper-Vbased backup tool is going to take a
crashconsistent backup. MySQL (like any other database system) isn�t always recoverable from a crash-consistent backup; tool is going to take a crash-
consistent backup. MySQL (like any other database system) isn�t always recoverable from a crash-consistent backup; even when recovery is possible, it may be
painful.
MySQL is just one example; any number of line-of-business Applications could tell a similar tale. In the case of MySQL, one solution is to find a guest-level
backup Application that is MySQL- aware and can back it up properly. For Applications for which no backup Application has a plug-in, you may need to have
preand post-backup scripts that stop services or close Applications. If brief downtime is acceptable, you can disable the Backup item in Hyper-V Integration
Services, thereby forcing Hyper-V to save the state of the VM during backup. This technique results in an image-level backup and can be used on any
Application that doesn�t have a VSS writer.
References: https://www.altaro.com/hyper-v/vss-crash-consistent-vs-application-consistent-vss-backups-post-2-of-2/
Question: 596
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: I
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and
Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services.
References:
http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine
settings, p. 144
Question: 597
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing
network latency and the CPU overhead required for processing network traffic.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine
settings, p. 144
Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines,
p. 335
Question: 598
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. The imagex.exe command
B. The ocsetup.exe command
C. The setup.exe command
D. The dism.exe command
E. The Install-Module cmdlet
Answer: D
Explanation:
The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server- Gui-Shell /featurename:Server-Gui-Mgmt
Question: 599
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: J
Explanation:
What�s New in Hyper-V Virtual Switch
Port Mirroring
With Port Mirroring, traffic sent to or from a Hyper-V Virtual Switch port is copied and sent to a mirror port.
There are a range of applications for port mirroring an entire ecosystem of network visibility companies exist that have products designed to consume port
mirror data for performance management, security analysis, and network diagnostics. With Hyper-V Virtual Switch port mirroring, you can select the switch
ports that are monitored as well as the switch port that receives copies of all the traffic.
The following examples configure port mirroring so that all traffic that is sent and received by both MyVM and MyVM2 is also sent to the VM named
MonitorVM.
Set-VMNetworkAdapter VMName MyVM PortMirroring Source
Set-VMNetworkAdapter VMName MyVM2 PortMirroring Source
Set-VMNetworkAdapter VMName MonitorVM PortMirroring Destination
References: http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror
For More exams visit https://killexams.com/vendors-exam-list
Kill your exam at First Attempt....Guaranteed!
No comments:
Post a Comment